Products

Special bearing for the idle flywheel of multi-wire saw for granite and marble cutting.

The type XV cylindrical cross roller bearing has an integrated outer ring and a split inner ring, the mounting holes are provided on the outer ring. The inner ring is combined and with the outer ring by a dust-proof fixing ring.
The arrangement is convenient for installation.

The CRBH series cross roller bearing has a structure of combining the inner ring and outer ring, which saves the installation sapce and features high rigidity and good roataion accuracy.

The RA series cross roller bearing has a very thin bearing ring, the outer ring of which is a split one and the inner ring is integrated, the rotating speed can be increased and the structural weight can be reduced. The RA series cross roller bearing is suitable for the rotary joint of the robot arm.

The RU series cross roller bearings are designed to integrat the inner ring and outer ring, so the RU series bearings are able to carry much larger axial and radial loads, and due to the mounting holes have been provide, no fixing flanges and suport seats are required.

The RE series crossed roller bearing is a special type bearing with split inner ring and rotating outer ring. It is the type of bearing with a split inner ring and an integrated outer ring.It is suitable for the position in which requires high rotation accuracy of the outer ring.

SX series cross cylindrical roller bearing is a basic type of precision cross roller bearings, the structure of which is that the inner ring is an integrated one while the outer ring is a split one.

RB series crossed cylindrical roller bearing is the basic type of cross roller bearings.The inner ring of the bearing is a n integrated one while the outer ring is a splited one that fixed by bolts or special rivets.

The Metric Sealed Ball Bearing type A (angular contact structure) can carry double loads from radial and axial directions. There are single-sided sealing and double-sided sealing for selection. The sealing material is nitrile rubber.and the angular contact type can provide a variety of matching methods (face-to-face matching, back-to-back matching, three-group matching, etc.)

The sealed metric four point contact ball bearing is the kind that to install the sealing rings on both sides of an open ball bearing with the same structure.
The bearing can carry loads from axial and radial directions as well as the single load from the axial direction.

Sealed metric ball bearing type C (deep groove ball structure) is a single row bearing, which is able to carry the radial loads, the sealing ring shall be used on one side or double sides of the bearing according to service environment.

Metric ball bearing type A (angular contact ball structure) can carry larger axial loads while carring a portion of radial loads the speed of the bearing is higher than that of four point contact bearing and deep groove bearing.
The rotating speed of angular contact ball bearing is much higher than that of four point contact and deep groove ball bearings.